Manual for Reusable Parts of Komatsu Fuel Injection Pump – Failures, Inspections & Diagnosis
Pages: 35
Contents:
Introduction, Failure Signs and Diagnosis for Reuse, Inspection Points for Parts Reuse Diagnosis, Part, Inspection Points, Inspect Tappet Roller, Inspect the Surface for Peeling, Flaws, The Lip Face for Flaws, Inspect for Wear, Inspect for Looseness Due to Wear, Inspect for
Change in the Free Length and Deformation, Standards for Failure Determination, Use Again, Use After Reconditioning, Do not Use Again, Stands for Reuse of Injection Pump Parts, Part, Plunger, Camshaft, Pump Housing, Examples of Failures, Plunger, Failure Sign, Cause, Seizure, Worn Plungers, Small Scratches,
Metallic Contact, Flanking and Stepped, Excessively Worn Surface, Scuffed, Fretting, Slightly, Uneven Wear, Rough Valve Seat Surface, Construction and Function of Fuel Injection Pumps,
PE-A Type RSV, Fuel Injection Pump, Valve Holder, Spring, Oil Reservoir, Plunger Barrel, Plunger, Deflector, Control Pinion
Control Rack, Sleeve, Tappet, Camshaft, Torque Spring, Lever, Control Lever, Governor Spring, Start Spring, Idle Sub Spring, Angleich Spring, Flyweight, Full Load Stopper, Injection Nozzle, Types of Injection Pumps, Injection Pump Types
Codes, Construction of Injection Pumps, Injection Nozzles, Oil Reservoir, Deflector, Suction and Discharge Port, Plunger Barrel, Cam, Adjustment of the Fuel Injection Timing, Pinion,
Control Flange, PES-PD Type, Adjustment of the Fuel Injection Timing, PE-ZW Type, Engine Models,
Link, Gear Shaft, Gear, Angleich Spring, Failures and Their Causes, Dust and Water, Adjustments, Preventive Maintenance…