Lathe machine: Main Parts

Spread The Love By Sharing This..!!

Lathe was really the main machine apparatus which appeared as a valuable machine for metal cutting. Lathe can be characterized as a machine instrument which holds the work between two inflexible and solid backings, called focuses, or in a hurl or Face plate while the machine spins. Coming up next are a portion of the vital Parts of machine

There are numerous types of Lathe yet each machine comprise some fundamental part which are basic for its appropriate working. These parts are bed, device post, Chuck, head stock, tail stock, legs, Gear chain, lead screw, carriage, cross slide, split nut, cook’s garment, chip skillet, control ways and so on. These parts cooperate to acquire want movement of hardware and work piece so it tends to be machined.

lathe machine

Parts of Lathe Machine:

The machine comprise following parts.

  1. Bed

The bed of Lathe goes about as the base on which the distinctive settled and activities parts of the Lathe are mounted. Machine beds are generally made as single piece throwing of semi-steel (i.e., toughened cast iron),with the expansion of little amount of steel scrap to the cast press amid dissolving; the material ‘cast press’ encouraging a simple sliding activity. If there should arise an occurrence of to a great degree extensive machines, the bed might be in at least two pieces, shot together to from the ideal length.

2. Tool post

Machine Bed are overwhelming unbending structure which is having high damping limit with respect to the vibrations created by machines amid machining. The unbending structure will stays away from diversions. The aides and ways which are available on the highest point of the bed will go about as rails and backings different parts like tail stock. The bed will be structured so that effortlessly rushed to the floor of the machine shop.

It is darted on the carriage. It is utilized to hold the device at right position. Apparatus holder mounted on it.

3. Chuck

Throw is utilized to hold the workspace. It is rushed on the shaft which pivots the toss and work piece. It is four jaw and three jaw as indicated by the prerequisite of machine.

4. Head stock

Head stock is the principle body parts which are set at left half of bed. It is fill in as holding gadget for the apparatus chain, shaft, driving pulley and so on. It is additionally made by solid metal.

5. Tail stock

Tail stock arranged on bed. It is put at right hand side of the bed. The primary capacity of tail stock to help the activity when required. It is likewise used to perform boring task.

6. Lead screw

Lead screw is arranged at the base side of bed which is utilized to move the carriage consequently amid string cutting.

7. Legs

Legs are utilized to convey every one of the heaps of the machine. They are darted on the floor which averts vibration.

8. Carriage

It is arranged between the head stock and tail stock. It is utilized to hold and move the apparatus post on the bed vertically and on a level plane. It slides on the guide ways. Carriage is made by cast press.

9. Apron

It is arranged on the carriage. It comprise all controlling and moving system of carriage.

10. Chips pan

Chips skillet is put bring down side of bed. The fundamental capacity of it to conveys all chips expelled by the work piece.

11. Guide ways

Guide ways deal with development of tail stock and carriage on bed.

12. Speed controller

Speed controller switch is arranged on head stock which controls the speed of shaft.

13. Spindle

It is the primary piece of machine which holds and pivots the hurl.

Spread The Love By Sharing This..!!

2 thoughts on “Lathe machine: Main Parts

Leave a Reply

Your email address will not be published. Required fields are marked *